Table of Contents
Advertisement
Intended use
• Do not bring the system outer foil into contact with
hard objects.
Doing so may damage the blades as they are very
thin and deform easily.
• Do not dry the main unit with a dryer or a fan heater.
Doing so may cause malfunction or deformation of the
parts.
• Do not leave the shaver exposed to direct sunlight
with the foil frame detached.
Doing so may deteriorate the waterproof rubber and
degrade waterproof function, which may cause to
malfunction.
• Store the shaver in a place with low humidity after
use.
Failure to do so may cause malfunction due to
condensation or rust.
• Keep both the inner blades inserted. If only one of the
inner blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt
water or hot water. Do not soak the shaver in water for
a long period of time.
• The following symbol indicates that a specific
detachable power supply unit is required for
connecting the electrical appliance to the supply
mains. The type reference of power supply unit is
marked near the symbol.
Parts identification
A Main body
Protective cap
System outer foil
Foil frame
Foil frame release
buttons
Power switch
Lamp display
a. Shaving sensor
lamp ( )
Back
a
b
c
d
b. Battery capacity
lamp
c. Switch lock lamp
( )
d. Charge status
lamp ( )
Appliance socket
Outer foil section
System outer foil
release buttons
27
Advertisement
Chapters
Table of Contents
