Advertisement
13. Place the enclosure barrier and line base assembly into enclosure as shown Fig. 15.
14. Slide the line base assembly towards the mechanism assembly. Insert the end of rotor into the
mechanism assembly until the line base mounting holes are aligned as shown in Fig's 16 & 17.
Line Base Assembly
Enclosure Barrier
Enclosure Barrier
Electrical Shock Hazard
Could cause death or serious injury
Ensure the Enclosure Barrier is properly installed before restoring power
Fig. 16
Line Base Assembly
Fig. 15
WARNING
Mechanism Assembly
Rotor Assembly
8 / 10 (English)
Rotor Assembly
Fig. 17
View shown for clarification.
I.L. No. 508533A00
Advertisement
