Warmteafleider - Dell Latitude 3400 Service Manual

5. Connect the VGA board cable [1], and the display cable [2, 3] to the system board.
Next steps
1. Replace the battery.
2. Replace the base cover.
3. Replace the SD memory
4. Follow the procedure in

Warmteafleider

Removing the heatsink—UMA
Prerequisites
1. Follow the procedure in
2. Remove the SD memory
3. Remove the base cover.
4. Remove the battery.
Steps
1. Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2. Lift the heatsink off the system board [2].
card.
after working inside your computer.
before working inside your
card.
computer.
Onderdelen verwijderen en plaatsen 57