Uniden iGO CAM 65R Owner's Manual page 13

Anti Flicker
Camera Alert
Overspeed Alert
Parking Mode
G Sensor
Time Zone
Date & Time
Daylight Saving
Car Plate Stamp
Auto Power Off
LCD Auto Off
UNIDEN iGO CAM 65R
Change depending on the electrical power frequency
in your area (Default setting is 50Hz and you may not
have to change this setting).
Set the alert distance when there is a fixed Speed,
Red Light or Red Light-Speed Camera.
Enable this option to receive alerts when over the
selected speed limit.
When the car engine and the unit is turned off, this
mode enables the unit to turn back ON automatically
and create a locked recording when G-Sensor picks
up vibration. Unit must have sufficient battery power
remaining in order to record. The G-Sensor must
also be turned on.
This functions helps to protect/lock the video files
in case of a sudden movement/collision. You can
change the sensitivity level of the G-sensor.
Set the correct time zone for the GPS to get the
correct time settings for the device.
Change the date and time by pressing the UP and
DOWN keys, and then press OK to confirm and
move on to the next column. Press MENU to return
to the Menu Settings without saving.
Enable or disable daylight saving time.
Edit the car plate stamp by pressing the UP and
DOWN keys to select a number or an alphabet, and
then press OK to confirm and move on to the next
column. Press MENU to return to the Menu Settings
without saving.
Set the time duration to automatically power off the
device when powered by internal battery.
Set the LCD display off timer. Set to off to keep the
LCD display always on.
13
Vehicle Recorder