Voice - Eagletone DPW 400 User Manual

VOICE DEMONSTRATION
Press and hold down a voice selection button, then press the DEMO button. A piece of music will play with
the selected voice.
Use the VOICE select buttons, the VARIATION button or the ▲/▼ buttons to change the voice used for
demonstration.
The display shows the voice number. Press the DEMO button again to stop the voice demo playing
.
ORCHESTRATION DEMONSTRATION
There are 10 demos. Press the DEMO button, its indicator lights up. All demos will play back from No. 1 in
loop. The display shows the demo song number with the «d-» prefix in front. Press the ▲/▼ buttons to
select a demo song. Press the DEMO button again to stop it.
When the piano is turned on, the LED display shows the voice number. The default voice setting is 01 Grand
Piano.
SELECT A SOUND
There are 15 voices numbered from 1 to 15. You can select them via the voice quick selection buttons
and the VARIATION button. Each VOICE selection button refers to a category of instrument voice.
Press the VARIATION button to select a voice inside a category. The VARIATION button indicator
has two colors. When the voice changes inside a category, the color of the VARIATION button indi-
cator also changes and the corresponding voice number is indicated in the display. You can also use
the▲/▼ buttons to select voices in the voice selection mode and the corresponding indicator will light up.
NOTE :
Though only 15 voices can be selected by key, 128 MIDI voices and a percussion sound kit are built
in the piano. These are available for playing complete MIDI music through MIDI/USB connection.

VOICE

-
-
9
9
-
9
9