Whirlpool ED25RQ Use And Care Manual page 13

2. Lift the signal arm so It clicks into the OFF
position Ice can stall be dispensed, but no more
will be made.
3. Lift the front of the storage bin. Pull It out.
4. Empty the bin Use hot or warm water to melt
the ice if necessary. Never use anything
sharp to break up ice in the bin. This can
damage the btn and dispenser mechanism.
5. Wash with mild detergent. Rtnse well. Do not
use harsh or abrasive cleansers or solvents.
6. When replacing the bin, make sure it is pushed
in all the way. Push the signal arm down to the
ON position to restart ice production.
To turn on night light, slide dispenser LIGHT
switch to the left. See page 9 for directions for
changing dispenser light.
13