4.3
H shift plate
The H shift plate is a new facility introduced on the LKRL-Z200 series lenses to simplify H
shift adjustment when swapping between 2D and 3D lenses where the projector.
The H shift plate is preset at the factory at the centre position (no H shift). If H shift is needed
during installation, the lens is adjusted for the required H shift and then the the H shift plate is
locked in position using the two adjustment screws. The plate ensures the H shift is preset at
the correct position which avoids having to readjust H shift every time the lens is swapped.
www.pro.sony.eu/dcinema
7