Table of Contents
Advertisement
V shift is adjusted using a manual knob
located above the lens mount
mechanism.
The V shift adjustment is accessed via
a small door on the top of the projector.
There is an indicator (pointer arrow) on
the side of the lens mount mechanism
to indicate when the V shift is at its
mechanical centre.
• Electric V shift
The SRX-C also offers an electric V shift adjustment. Please refer to the SRX-R320
Installation manual for details.
Electric V shift would normally be used to correct for differences in the image centre position
when going from 1.85:1 ratio to 2.39:1 ratio. For example when aligning on a Scope shaped
screen:
•
Display the 1.85:1 test pattern, adjust the lens zoom and focus to adjust the 1.85:1
test pattern to fill the screen height. Adjust manual V shift knob to line up the image
centre with the screen centre. Save the settings in the Function memory along with
masking etc.
•
Switch to the 2.39:1 test pattern, adjust the zoom and focus to fill the height of the
screen. Adjust the Electric V shift to align the image centre with the screen centre of
necessary
www.pro.sony.eu/dcinema
6
Advertisement
Table of Contents
