Table of Contents
Advertisement
Wireless Remote Control
Inserting Batteries
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
1
Remove the cover on the back of the remote
control.
2
Insert the new batteries and make sure that the
+ and - terminals of the batteries are installed
correctly.
NOTE
• New batteries are supplied with the air
conditioner for use in the remote control.
• Do not use a rechargeable battery. Make sure
that the battery is new.
• In order to prevent discharge, remove the
battery from the remote control if the air
conditioner is not going to be used for an
extended period of time.
• Keep the remote control away from extremely
hot or humid places.
• T o maintain optimal operation of the remote
control, the remote sensor should not be
exposed to direct sunlight.
Ventilation
Push the ventilation lever in to the closed position
to maintain the best cooling performance. Pull the
ventilation lever out to open the vent and draw
fresh air into the room.
Air Direction
Airfolw can be adjusted by changing the direction
of the air conditioner's louvers
Adjusting Horizontal Airflow
Direction
The horizontal airflow is adjusted by moving the
levers of the vertical louvers to the left or right.
Adjusting Vertical Airflow Direction
Touch the horizontal louvers to adjust the airflow
up or down.
NOTE
• When the weather is extremely hot, the unit may
turn off automatically to protect the compressor.
Slinger Fan
This air conditioner is equipped with a slinger fan.
(See drawing.)
The fan's outer ring picks up the condensed water
from the base pan if the water level gets high
enough. The water is then picked up by the fan and
expelled through the condenser, making
the air conditioner more efficient.
Open
Close
OPERATION
15
EN
Ring
Advertisement
Table of Contents
