Installation; Installing The Hide-Away Unit - Pioneer AVD-W9000 Owner's Manual

Section
04 Connection and

installation

Installation
Important
! Check all connections and systems before
final installation.
! Do not use unauthorized parts. Use of un-
authorized parts may cause malfunctions.
! Consult your dealer if installation requires dril-
ling of holes or other modifications to the vehi-
cle.
! Do not install this unit where :
— it may interfere with operation of the vehi-
cle.
— it may cause injury to a passenger as a re-
sult of a sudden stop.
! When mounting this unit, make sure none of
the leads are trapped between this unit and
the surrounding metalwork or fittings.
! Do not mount this unit near heater outlets
where it would be affected by heat, or near the
doors where rainwater might splash onto it.
! Before drilling any mounting holes, always
check behind where you want to drill the
holes. Do not drill into the gas line, brake line,
electrical wiring or other important parts.
! If this unit is installed in the passenger com-
partment, anchor it securely so it does not
break free while the vehicle is moving, caus-
ing injury or an accident.
! If this unit is installed under the front seat,
make sure it does not obstruct seat move-
ment. Route all leads and cords carefully
around the sliding mechanism so they do are
not caught or pinched in the mechanism and
cause a short-circuit.

Installing the hide-away unit

Thoroughly wipe off the surface before affixing
the hook and loop fasteners.
! If the hook fasteners adhere to the car mat
directly, you may install this unit without
using the loop fasteners.
18
En
% Mount the hide-away unit using the
hook and loop fasteners.
Car mat or chassis
Hide-away unit
Hook fastener
Loop fastener