Reverse The Door Swing - Whirlpool 326031822 Use & Care Manual

Reverse the Door Swing

WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
TOOLS NEEDED: in. nut driver, flat-blade screwdriver, flat
2 in. putty knife
IMPORTANT:
Before you begin, turn the refrigerator control OFF. Unplug
refrigerator or disconnect power. Remove food and
adjustable door bins or can racks from the door.
Do not lay the refrigerator down while you reverse the door
swing. See "Unpack the Refrigerator."
Remove the Door - Style 1
1. Unplug refrigerator or disconnect power.
2. Use the 2 in. putty knife to pry up the hinge cover. Remove
the hinge cover by lifting it up from the back.
1. Hinge cover
3. Remove the in. screws from the top hinge. Keep all parts
together.
NOTE: If your model has a lock, see "Reverse the Lock."
1.
2. Top hinge
3. Shim
4. Lift the door up and off of the bottom hinge.
1
1
2
3
in. screws
5. If your model does not have a lock, remove the door hinge
hole plug and move it to the opposite side as shown.
NOTE: If your model has a lock, see "Reverse the Lock."
1
1. Door hinge hole plug
Remove the Door - Style 2
1. Unplug refrigerator or disconnect power.
2. Remove the cabinet cover by lifting up at the back and pulling
the cabinet cover forward to release it from the top hinge and
cabinet cover support bracket.
1
2
1. Cabinet cover
2. Back of refrigerator
3. Remove the in. screws from the top hinge. Keep all parts
together.
1.
2. Top hinge
3. Shim
4. Remove the cabinet cover support bracket. Keep all parts
together.
1
2
3
1. in. screws
2. Cabinet cover support
bracket
3. Shim
5. Lift the door up and off of the bottom hinge.
1
2
3
in. screws
5