Signals And What They Mean; Lock Functions - Kaba Mauer Code-Combi KL 82011 Operational Instructions

GB
2 Signals and what they mean
bar handle
Diagram 1: Control unit plastic
Symbol
1 x
3 x
10 x
1, 2, 4, 8 oder
1 Minuten
2 x
3 Lock functions
Programming to be effected only with the lock and safe opened.
The lock can be opened with a 4-digit user code or an overriding 8-digit master code.
The lock is set at the master code 1 2 3 4 5  7 8 when it is supplied. Change this code
immediately to your own master code for security reasons.
Diagram 2: Options "Coin" and "Activator key"
The coin has to be inserted first in the case of the option "coin" and the activator key in the
case of the option "activator key". The lock can then be used in accordance with 3.1 to 3.5.
Page 7
green LED red LED
Signal
Green LED flashes once
Green LED remains lit up
Red LED flashes 3 times
Red LED flashes 10 times
after ON button pressed
Red LED flashes every second
for 1, 2, 4, 8 or 1 minutes after 3
incorrect code entries
Acoustic signal sounds twice
82011 Code-Combi KL
Meaning
Valid code entered
Lock is ready for programming
Invalid code entered or
entry suspended by pressing P
button
Insufficient voltage of the battery
Lock is in blocked status
E.g. new 8-digit master code
entered
Kaba Mauer GmbH