Table of Contents
Advertisement
Installing the battery (BBU)
Figure 51: Attaching the connection cable to the system board
Ê Plug the connection cable to the connector "J1H1" on the system board (next
to the "SCSI B" connector).
I
The connector "J1H1" has a small plastic cover (A) which must be
removed first.
Ê Reinstall the memory boards or dummy memory boards in slots "C" and "D".
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
68
chapter "Completion" on page
Options Guide
Battery for the RoMB controller
A
69f.
U41612-J-Z156-2-76
Advertisement
Table of Contents
