Safety Instructions; Technical Data; Troubleshooting - Kayoba 604-031 Operating Instructions Manual

Cooler/thermal box
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
When you switch from cooling to heating or vice versa, it is important for the cooler/thermal box to
be set to STOP for at least five minutes before being switched over.
When the cooler/thermal box is turned on, it is important for it to be placed in a well ventilated
location.
Do not place the cooler/thermal box in direct sunlight.
Do not pour water into the cooler/thermal box.
Do not use the cooler/thermal box outdoors in the rain.
When cleaning, you are recommended to use a soft, lint-free cloth.
If the cooler/thermal box is not used for a while, it must be cleaned before use and stored in a well
ventilated location.
Do not expose the cooler/thermal box to hard impacts.
Keep the ventilation holes free, as otherwise there is a risk of the cooler/thermal box overheating
and being damaged.
1.
Ensure that the switch in the cooler/thermal
box is in the STOP position.
2.
The power cord can now be connected to the
cooler/thermal box, see 1.
3.
The other end of the power cord can now be
connected to the 12 V socket, see 2.
4.
The cooler/thermal box can now be started.
When cooling, the green light comes on.
5.
When heating, the red light comes on.
6.
It is important to allow at least 5 minutes to
elapse in between switching the
cooler/thermal box to cooling or heating –
and vice versa.
Problem
The cooler/thermal box does not work (indicator
lights do not come on) and the fan does not rotate.
Poor cooling.
ENGLISH

SAFETY INSTRUCTIONS

TECHNICAL DATA

Rated voltage
Rated current
Power consumption
Volume
Cooling capacity
Heating capacity
Cable length
Dimensions
Weight

TROUBLESHOOTING

230 VDC / 12 VAC
5.5 A
DC 60 W +/- 10%
AC 72 W +/- 10%
45 l
20°C below the ambient temperature
50-60°C
180 cm
69 x 43 x 42 cm
9.7 kg
USE
Action
Check that the power cord is correctly connected.
Check that the power supply is working.
Check the area around the 12 V outlet. Dirt can
cause impaired contact.
If the box is not cooling normally, and the fan is not
rotating, it may be damaged. Allow an authorised
service centre to inspect the cooler/thermal box.
If the box is not cooling normally, but the fan is
rotating, the cooling mechanism may be damaged.
Allow an authorised service centre to inspect the
cooler/thermal box.
8

Advertisement

Table of Contents
loading

Table of Contents