Ashly Aquacontrol (Via Aquacontrol™); And Protēa™ Presets For Is Speakers; Basic Loudspeaker Processing - Ashly IS Series Operating And Installation Manual

IS Series + SP 12.1P Operating Manual
Ashly AquaControl (via
AquaControl™)
and Protēa™ software presets
for IS Speakers
Audio performance, including directivity and
frequency response of IS Series speakers can
be enhanced when used in conjunction with:
• mXa- 1502 mixer amplifier
• Pêma amplifiers
• ne amplifiers (pe version only)
• nXp amplifiers
• ne DSP system and matrix processors
• ne 24.24m DSP matrix processor
• SP series DSP loudspeaker processors
The various capabilities and software used
are shown as follows:
Directivity-
weighted,
optimized linear
Ashly frequency
Ashly Product Software
mXa-1502 AquaControl
Pêma amplifiers Protêa™
ne amplifier
Protêa™
(pe version)
nXp amplifiers
Protêa™
ne system and
Protêa™
matrix processors
ne 24.24m DSP
Protêa™
matrix processor
SP series speaker
Protêa™
processors
Basic loudspeaker processing is defined as basic EQ (4-Band PEQ) approximating the appropriate
✤
curve, plus Delay. No advanced EQ or FIR filters.
HPF/LPF only
✽
Universal
crossover
implementation
for use between FIR-corrected,
subwoofers linear phase
and full-range response above
response loudspeakers about 300 Hz
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✽
–
✽
Basic
loudspeaker
processing
✔
N/A
✔
N/A
✔
N/A
✔
N/A
✔
N/A
–
N/A
–
✤
7