Functions Of Control Panel - Princess 353120 Instruction Manual

Instruction manual

FUNCTIONS OF CONTROL PANEL

• Power button: Press to turn unit "ON" or "OFF". The
current humidity level will be displayed with the defaults of the
continuous mode "CO" and the compressor will then start
immediately dehumidification with the power indicator lamp on,
when the compressor stops the light will flash.
• Mode: use to switch between the different modes.
– Dehumidify
– Fan
– Laundry
•
required humidity: "CO" (continuous), 30 to 90% and
"AU" (comfort). The default mode is "CO". Note: Press up and
down at the same time to convert the display from temperature
(°C) to humidity (%).
8
Up-Down (hum+, hum-): Set the
• Speed: Fan speed can be switched between high or
low. Note: In comfortable mode ("AU") with a room temperature
above 27 degree and in Laundry mode the fan speed is fixed and
cannot be adjusted.
• Timer (Regular time range 01-24 hours):
– In the power on state press timer to set the timer for
scheduled shutdown.
– In the off state press timer to set the timer for scheduled start
of the dehumidifier.
• Swing: Swing function on/off, pressing the button when
the dehumidifier is on will let the louver swing continuously, press
the button again to let the louver stop moving.
• Child lock: press 5 seconds to activate the child lock
function, all other functions will not work when activated, to
disable the child lock press the same button again for 5 seconds.
• WiFi: To set the dehumidifier in pair mode, press and
hold the Wi-Fi button until you hear 3 beeps, it could take about 6
seconds.