Assembly Procedure - Yamaha YCH7018 Owner's Manual

Assembly Procedure

 Assembling the Stand: YCH7018, YCH6018, YCHS7018
YCH7018, YCH6018 and YCHS7018 are packaged assembled.
When taking the chimes out from the package and raising them, always use two or more people.
CAUTION
1.
Take the stand out from the package, and
then stand it on a flat, level surface.
2.
Press down with your foot on the caster stop-
pers to lock the casters.
This stopper switches
between locking and
unlocking the casters.
(Press down on it to
lock.)
3.
Lower the damper pedal.
To lower the damper pedal, loosen the fixing bolt,
lower the pedal, and then tighten the fixing bolt again.
Damper pedal
4.
Release the damper.
To release the damper, push the damper stopper
while pressing the damper pedal, and then release
your foot from the pedal.
Damper stopper
5.
Install the sound tubes by following the
assembly instructions in "Attaching the
Sound Tubes."
6.
Adjust the amount of damper pedal depres-
sion by following the instructions in "Adjust-
ing the Damper Pedal (YCH7018, YCH6018,
YCHS7018)."
YCH7018 YCH6018 YCHS7018 YCHS7006 Owner's Manual•5
Fixing bolt