Advertisement
1.2
Installing an Inverter (support-mounting is used as an example)
1. Determine the hole positions on the support
based on rear panel dimensions.
Unit: mm
3. Secure the rear panel.
M10 (3 PCS)
30 N· m
5. Tighten hexagon bolts.
NOTE
1. The anti-theft lock is prepared by customers.
2. For details about wall-mounting the device, see the User Manual.
2. Drill holes.
4. Mount the inverter on the rear panel.
6. (Optional) Install an anti-theft lock.
2
Advertisement
