Active 240-watt 8"/320-watt 10" pa speaker system with built-in media player, bluetooth receiver and integrated mixer (40 pages)
Summary of Contents for Behringer Europort MPA100BT
Page 1
NCDW Portable PA System District Operations Manual...
Page 2
System 1 Behinger MPA100BT 100watt 2 channel with bluetooth Channels can be wire ¼ balance or XLR unbalance Channels can be wireless bluetooth mics System can support maximum of 2 channels Aux input with Blue tooth or 1/8/3mm aux input for computer/mobile phone 1 Wireless Behinger ULM300 single wireless mic.
Page 3
MPA100BT All in One Portable PA System Overview System works on 120V power or internal 6 Volt Lead Acid battery. If fully charge will work for 20 hours on battery. Takes 48 hours to fully charge battery. 2 adjustable mic channels that can be wire and/ou blue tooth mics. Can only support 2 mics at a time.
Page 4
Set up 1. Charge unit min 48 hours before event. a. Connect power cord to unit and leave off to charge. 2. Set up speaker stand or set system on a solid surface. 3. Using wireless mic inset transmitter that cooresponds to mic or mics being used into USB port.
Page 5
Mic operation Single wireless Mic Dual wireless mic Top buttom Volume up Left Button Volume Up BT link BT Link Power on Power on Buttom Volume Down Right Button Volume Down Mute Mute Power off Power off...
Page 6
Mic Battery Removal Battery should not be left in. R ecommend removal of batteries between each use . 1. Unscrew bottom of mic 2. Open battery door by depress tap at top and pulling door down.
Page 7
LinkIng Blue Mics 1. Insert transmitter into PA system a. ULM 300 is for single mic b. ULM200 is for dual mics 2. LED on side will blink until Linked 3. Solid LED mic is Linked to transmitter 4. Computer/mobile phone Bluetooth Link button is on top.
Need help?
Do you have a question about the Europort MPA100BT and is the answer not in the manual?
Questions and answers