Download Print this page

Dirty Dog 4x4 DD-P-JK4-07 Installation Instructions

Pet divider for jeep jk 2007-up

Download this manual

Thank you for purchasing a Dirtydog 4x4 netting system. Please

read these instructions fully to familiarize yourself with the

installation. Set aside 15 minutes for the first time you install your

pet divider.

First step is to install the velcro

wraps around the top roll bar.

Installation Instructions

Pet divider for Jeep JK 2007-up

DD-P-JK4-07

Need help?

Do you have a question about the DD-P-JK4-07 and is the answer not in the manual?

Page 1 Installation Instructions Pet divider for Jeep JK 2007-up DD-P-JK4-07 Thank you for purchasing a Dirtydog 4x4 netting system. Please read these instructions fully to familiarize yourself with the installation. Set aside 15 minutes for the first time you install your pet divider.
Page 2 Look at the photos to see how it is positioned along the roll bar. The outermost straps on either endwraps around the roll bar on the opposite side of the roll bar. The two shock cords at the back hook on to the loops behind the seats.
Page 3 Adjust and tighten straps as needed to even out the net so it is positioned properly. Your pet divider comes with a one year warranty against manufacturing defects. Cuts, abrasions, sun faded items are not covered under the warranty. Dirtydog 4x4 3045 Southcreek Road Mississauga, ON Canada...