Siemens SIMATIC S7-200 Series Manual page 2

Introduction
This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure is described in the sections identified below:
1
System Configuration
This section lists the types of External
Devices and SIO that you can connect.
2
External Device Selection
Select the model (series) of the External
Device and its connection method.
3
Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
4
Setup Items
This section describes communication
setup items on the Display.
Set the Display's communication settings
in GP Pro-EX or in off-line mode.
Operation
GP-Pro EX Device/PLC Connection Manual
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver

"1 System Configuration" (page 3)

"2 External Device Selection" (page 6)

"3 Communication Settings" (page 7)

"4 Setup Items" (page 9)
2