Logitech CANVAS iK1071 Setup Manual page 5

Establishing connection with your iPad
The keyboard case links to your iPad
via a Bluetooth connection. The first time
you use the keyboard case, you must pair it
with your iPad.
The status light blinks blue to indicate
that the keyboard is discoverable,
ready for pairing with your iPad.
The first time you turn on the keyboard
it remains discoverable for 15 minutes.
If the status light turns red, replace
the batteries. For more information,
see "Replacing the keyboard batteries."
To pair your keyboard case with your iPad:
1. On your iPad:
• Make sure Bluetooth is on.
Select Settings > Bluetooth > On.
• Select "Canvas iPad Air 2"
from the Devices menu.
2. If your iPad requests a PIN, enter it using
the keyboard (not on your iPad).
Logitech CANVAS - Keyboard Case - For iPad Air 2
When successful connection is made,
the status light turns solid blue for
a short time, and then turns off.
Connecting to another iPad
1. Move the keyboard case into
the typing position.
2. On your iPad, make sure Bluetooth is on.
Select Settings > Bluetooth > On.
3. Press the Bluetooth connect button
for 2 seconds until the status light
blinks blue:
The keyboard is discoverable
for 3 minutes.
4. Select "Canvas iPad Air 2" from
the Devices menu.
5. If your iPad requests a PIN, enter it using
the keyboard (not on your iPad).
When successful connection is made,
the status light turns solid blue for
a short time, and then turns off.
English 5
2s