Your Range - Whirlpool SF3000SE Use & Care Manual

U Y
SING OUR
To get the best cooking results, you should use your range the correct way. This section tells
you what you need to know to use your range safely and efficiently.
L
IGHTING STANDING PILOTS
Your range comes with standing pilots. When you
first use your range, you have to light the standing
pilot. The pilot light will stay lit when you turn off
the burners.
To light surface burner pilots:
1.
Make sure all controls are turned off.
2.
Remove the surface burner grates from the
3.
To light, hold a lit match over the pilot light
R
ANGE
cooktop. Lift up the
cooktop. (See "Lift-up
cooktop and surface
burners" on page 18.)
located between the
front and back burners.
The pilot flame should
be 1 ⁄ to 3 ⁄ inch high.
4 8
4.
If the pilot flame needs adjustment, turn the pilot
5.
Lower the cooktop and replace the grates before
adjustment screw located
midway down the length
of the manifold pipe,
behind the control panel.
using the surface burners.
7