Whirlpool SF3000SE Use & Care Manual page 20

CARING FOR YOUR RANGE
R
EMOVING THE OVEN DOOR
To replace:
NOTE: The nails or screws you inserted must still be
in both sides of the door.
1.
Grasp the door on the sides with your fingers
on the front of the door and your thumbs on the
inside surface.
2.
Rest the hinge hanger so that it is flat (at the
bottom of the hinge hanger on the bottom of
the front frame slot).
3.
Position the door with the hinge hanger slots
almost parallel to the front frame.
4.
Push up and in until the hinge hanger slots
become fastened to the range. Lower the door
and rotate it slightly from the front to the back
until the slots are fully fastened. The hinge
hanger will be close to the bottom of the front
frame slot.
5.
Pull door open about halfway and remove the
nails or screws.
6.
Close the door.
20
.
CONT
( )
Oven door
Up
Remove nail
or screw
In
Front frame
slot bottom
Range
Hinge
hanger
Hinge
hanger
flat