GGP BT 48 Li 2.0 Operator's Manual page 7

1
EN
TABLE OF CONTENTS
1. Battery ................................................................................................................................................................1
2. Battery Charger ...........................................................................................................................3
3. Dispoal ........................................................................................................................................4
1. Battery
SPECIFICATIONS
BT 48 Li 2.0
Battery: 48V Max, 96Wh
Voltage per cell: 3.6V ; Number of cells: 12
Charge time: 60 min.
(use CG 48 Li Charger )
BT 48 Li 4.0
Battery: 48V Max, 192Wh
Voltage per cell: 3.6V ; Number of cells: 24
Charge time: 120 min.
(use CG 48 Li Charger)
BT 48 Li 2.5
Battery: 48V Max, 120Wh
Voltage per cell: 3.6V ; Number of cells: 12
Charge time: 120 min.
(use CG 48 Li Charger)
BT 48 Li 5.0
Battery: 48V Max, 240Wh
Voltage per cell: 3.6V ; Number of cells: 24
Charge time: 120 min.
(use CG 48 Li Charger)
For the proper use, maintenance and storage of this
battery, it is crucially important that you read and
understand the instructions given in this manual.
To avoid serious injury, risk of fire, explosion and danger
of electric shock or electrocution:
„ DO NOT probe the charger with conductive materials.
The charging terminals hold 120 V.
„ If the battery pack case is cracked or damaged,
DO NOT insert into the charger. Replace witha new
battery pack.
„ DO NOT charge these battery packs with any other
type of charger.
„ DO NOT allow liquid inside the charger.
„ DO NOT try to use the charger for any other purpose
than what is presented in this manual.
„ DO NOT try to short circuit any terminals of battery
pack.
If the battery fluid gets in your eyes, flush immediately
with clean water for at least 15 minutes. Get
immediate medical attention. Do not charge the
battery pack in rain or in wet conditions. Do not
immerse the tool, battery pack, or charger in water or
other liquid.
WARNING
„ Do not allow the battery pack or charger to overheat.
If they are warm, allow them to cool down. Recharge
only at room temperature.
„ Do not cover the ventilation slots on the top of the
charger. Do not set the charger on a soft surface
i.e. blanket, pillow. Keep the ventilation slots of the
charger clear.
„ Do not allow small metal items or material such as
steel wool, aluminum foil, or other foreign particles
into the charger cavity.
„ Unplug the charger before cleaning and when there
is no battery pack in the charger.
„ Do not place the battery pack in the sun or in a warm
environment. Keep at normal room temperature.
„ Do not try to connect two chargers together.
„ Keep in shady, cool and dry condition, if the battery is
not charged for a long time; charge the battery for 2
hours every 2 months.
„ The battery pack cells may develop a small leak
under extreme usage or temperature conditions. If
the outer seal is broken and the leakage gets on your
skin:
„ Use soap and water to wash immediately.
„ Neutralize with lemon juice, vinegar, or other mild
acid.
„ If leakage gets in your eyes, follow instructions above
and seek medical attention.
„ Please check prior use, if output voltage and current
of the battery charger is suitable for the charging
battery pack.
„ Do not use the charger in the circumstances that the
output Polarity does not match the load polarity.
„ For indoor use only.
„ The cover may under no circumstances be opened.
If the cover is damaged, then the charger may no
longer be used.
„ Do not recharging non-rechargeable batteries.
CHECKING BATERY CAPACITY
Press the battery capacity indicator (BCI) button. The
lights will illuminate according to the batteries capacity
level. See chart below:
BATTERY