GGP BT 48 Li 2.0 Operator's Manual page 10

BATTERY CHARGER / DISPOSAL
mounted.
3.If fastening to wood studs use 2 wood screws.
4.Drill two holes 2 3/8" (6 cm) on center ensuring they
are level.
5.If fastening to drywall use wall anchors and screws to
secure the charger to the wall.
3. DISPOSAL
Do not dispose of electrical equipment with household waste material. In observance of European Directive
2012/19/EC on waste electrical and electronic equipment and its implementation in accordance with national
regulations, electric equipment that has reached the end of its life must be collected separately and recycled
in an ecologically compatible way. If electrical equipment is disposed of in dumps or in landfills, hazardous
substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
For further information on the disposal of this product, contact a domestic waste collection authority or your dealer.
NOTE: If the battery and the charger won't be used for a
long time, please remove the battery from the charger
and pull out the AC power plug.
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS - DANGER: TO
REDUCE RISK OF FIRE OR ELECTRIC SHOCK
CAREFULLY FOLLOW THESE INSTRUCTIONS.
2. Confirm the voltage available at each country location
before using the charger.
3. If the sharp of the plug does not fit the power
outlet, use an attachment plug adaptor of the proper
configuration for the power outlet.
4
EN