Panasonic CF-T7 Series Reference Manual page 81

Troubleshooting (Advanced)
To increase the lifetime of the battery
You can prevent deterioration of the battery pack and extend the lifetime of the battery by setting Economy Mode (ECO) to
"Enable" in the Economy Mode (ECO) setting utility. (
However, when Economy Mode (ECO) is set to "Enable", the battery pack stops charging at 80% of fully charged, so the
battery operation time is shorter.
To enable/disable the Economy Mode (ECO), refer to "Switching the Economy Mode (ECO)". (
Problems with Cursor
The cursor cannot be controlled properly
Sensitivity when touching the Touch Pad can be adjusted. (
Make sure [Touch Pad] is set to [Enable] on the [Main] menu of the Setup Utility. (
With the following procedure, check that no external mouse driver is installed. If it is installed, it may not possible to use
the Touch Pad.
Click (Start) - [Computer] - [System properties] - [Device Manager].
A
A standard user needs to enter an administrator password.
Double-click [Mice and other pointing devices].
B
If a name other than [Synaptics PS/2...] is displayed, then an external mouse driver is installed. Delete it, then
restart the computer.
Restart the computer by using the keyboard.
Press and press
If the computer does not respond to keyboard commands, read "No response." (
The cursor moves randomly
Adjust the touch sensitivity.
To adjust the sensitivity, refer to "Adjusting the Sensitivity when Touching the Touch Pad" (
Check that no external mouse driver is installed. Refer to steps
erly". (above)
The cursor cannot be moved with a connected mouse
Check that the mouse is correctly connected.
Install the driver for the connected mouse.
If the external mouse driver is installed, the Touch Pad may not be used. Refer to "When Using an External Mouse" (
three times, and press
page 25)
page 11)
to select [Restart] and press Enter.
and under "The cursor cannot be controlled prop-
A B
81
page 26)
page 67)
page 79)
page 11).
page 48).