Panasonic CF-T7 Series Reference Manual page 70

Setup Utility
Boot Menu
*1
Use the Panasonic USB floppy disk drive (optional: CF-VFDU03)
*2
The devices under [Excluded from boot order] are not booted.
To change the boot order
To move up, select the device with
To move down, select the device with
To move the device from [Excluded from boot order] to [Boot priority order] or vice versa, select the device with
then press X.
To return to the default setting, press 1.
NOTE
The default order is [USB FDD] -> [Hard Disk] -> [USB CDD] -> [PCI LAN].
To boot from the following devices, make the settings as below.
To boot from
• USB connected device
• LAN
In the [Boot] menu, the names of the connected devices (including internal devices) will be displayed.
If more than one of the same devices are connected, only one device name will be displayed.
Boot priority order:
*1
1: USB FDD:
2: Hard Disk: xxxxxxxxxx
3: USB CDD:
4: PCI LAN: xxxxxxxxxx
5:
6:
7:
8:
Excluded from boot order:
: USB KEY:
: USB HDD:
: USB LS120:
, and then press F6.
and
, and then press F5.
and
You need to set
: [USB Port] and [Legacy USB Support] to [Enable] (
: [LAN] to [Enable] (
*2
page 68)
70
and
page 68)
, and