Onda V-10 PLUS User Manual page 19

Danger! Be sure to switch off the power and unplug the socket before
replacement!
Step 1.
Tools preparation
Prepare a 3×75 Flat Blade screwdriver.
Step 2.
Switch Off the power supply
Switch off the power supply, and unplug the socket.
Step 3.
Take out the Fuse Seat
Take out the fuse seat by the screwdriver.
Step 4.
Replace a new fuse
Pick out the spare fuse (3.15A/250V) and replace it to the working position.
Step 5.
Reset the fuse seat
Replace the fuse seat in the power socket.
Step 6.
Switch on the power
Plug the socket and switch on the power.
1
2
16