Roland Boss ME-50 Service Notes page 15

Feb.2003
[Mute Off]
fig.test-20_50
[Mute On]
fig.test-21_50
• Next, connect the cable to OUTPUT R, then confirm that the waveform
output by OUTPUT R changes accordingly, as shown in the figures
below.
[Mute Off]
fig.test-22_50
16
[Mute On]
fig.test-21_50
• Disconnect the cable from OUTPUT R, then confirm that the waveform
output by OUTPUT L(MONO) changes accordingly, as shown in the
figures below.
[Mute Off]
fig.test-20_50
[Mute On]
fig.test-21_50
Reconnect the cable to OUTPUT R, then confirm that the waveform output by
OUTPUT changes accordingly, as shown in the figures below.
[Mute Off]
• Confirm that the value for the waveform amplitude is between 380 and
540 (mVp-p).