Required Lats Multi V Piping Design Software File; Adjusting Lats Multi V S Output For Altitude; Design Choices; Lats Report - LG MULTI V S ARUN038GSS4 Installation Manual

REFRIGERANT PIPING CONNECTIONS
LATS Multi V Piping Design Software
The proper design and installation of the refrigerant piping system is a critical element
ponents – a liquid line and a vapor line. A properly designed refrigerant piping system
ensures that refrigerant is delivered to the indoor unit coils for optimal system perfor-
mance and capacity.
LG Air Conditioner Technical Solution (LATS) software is a total design solution for LG
engineer with specifying and sizing outdoor and indoor units (by calculating component
capacity based on design conditions), laying out the refrigeration distribution pipe
system, checking piping limitations, calculating refrigerant charge, and generating
equipment schedules and piping diagrams in (.dxf) format for use on CAD building design drawings.*
* Windows
®
To ensure that the refrigerant piping design meets LG's quality standards, a LATS refrigerant piping design must be provided with
created and provided to LG prior to system commissioning to ensure the proper pipe size has not changed.

Adjusting LATS Multi V S Output for Altitude

When a system is installed at elevations significantly above sea level, consider the impact air density has on the capacity of the indoor and
air-source units. LATS does not de-rate indoor unit capacity for high altitude applications. Be sure to apply locally accepted correction factors
when calculating actual indoor unit capacities at that altitude.

Design Choices

neer an easy to use Tree mode.
Tree Mode
Using the Tree mode, the engineer can quickly create a one-line
neered pipe system into the building drawings is done at a later date
by the draftsperson using standard drafting software tools.
Import building loads from an external file (.xls format).
• System components selected using an easy drag and drop
process.
• Automatically analyzes and checks the design complies with most
piping design limitations.
• Sizes refrigerant piping.
• Generates a system engineering report (.xls format).
• Generates an equipment schedule (.xls or .dxf format).
• Generates a system piping diagram (.dxf format).

LATS Report

component performance, and capacity data. The report calculates the system combination ratio, calculates the system refrigerant charge,
pipe sizes segregated by building, by system, by pipe size, and by pipe segments.
34
® -based application assists the design
Corporation.
®
-
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
-
Figure 34:
-