Whirlpool RF390PXW Use And Care Manual page 18

Caring For Your Range
Continued
3. Lift out the reflector bowl and tnm
ring. See "Cleanrng trps" on page 25
for cleaning Instructions.
Replacing
Burn, Electrical Shock and
Fire Hazard
l
Make sure all surface units are
OFF before replacing surface
units and reflector bowls.
Failure to do so can result in
burns or electrical shock.
l
Do not line the reflector bowls
with foil. Fire or electrical shock
could result.
1. Lrne up openings In the reflector
bowl and notches rn the lrrm rrng with
the surface unit receptacle and the
element hold down clip.
2. Hold the surface unrt as level as pos-
sible with the terminal just started
Into the receptacle. Push the surface
unit terminal into the receptacle.
18