Related Manuals for Ourmeter LCD-S700
Summary of Contents for Ourmeter LCD-S700
- Page 1 OurmeterIntelligent Technology(Changzhou)Co.,Ltd Manual LCD-S700 Ebike Intelligent Display...
- Page 2 Material&Dimension Material Caser and Cover and Press button: ABS, LCD window: PMMA Outside and mounting dimensions(mm) Scew Scew Press button outside and mounting dimensions(mm) Scew Scew...
- Page 3 Connection diagram: Connection diagram: To Head Light To Controller Wire definition: Red： Power supply Power supply-VCC Blue： Electronic lock Electronic lock-DS Black： GND Green： Data RXD Yellow： Data TXD BROWN： Head light(+) Head light(+) –DD White： Head light( Head light(-)-GND...
- Page 4 Remark： Connectors and Wire colors could be customized Connectors and Wire colors could be customized Connectors and Wire colors could be customized Installation ●Install the display in the middle of handlebar, then adjust Install the display in the middle of handlebar, then adjust Install the display in the middle of handlebar, then adjust to suitable angle, install the press button to left side angle, install the press button to left side...
- Page 5 Kmh/MPH according to habit Battery level： Indicates the battery level in real time Head light control： Press button to power on/off Back light adjustment： 3-level adjustment 7) Assist level： From 0 to 5, press button to change assist level, 0-no assist, 5-default value Distance：...
- Page 6 3. Presentation of screen Battery level: 5 levels, voltage interval could be customized Speed： Average SPEED/MAX SPEED/Real-time SPEED Speed unit： Kmh/MPH 6km mode Assist level： actual assist level 0~5. Head light icon： indicates when head light and back light are on Distance：...
- Page 7 4. Press button definition 4. Press button definition LCD-S700 uses independent press button, in total threebuttons: S700 uses independent press button, in total threebuttons: S700 uses independent press button, in total threebuttons: “UP” 、 “MODE” 、 “DOWN” 。 ” 。...
- Page 8 2) ODO/TRIP Long press o switch different speed o switch different speed Real time speed （ SPEED） → Max speed （ information， Real time speed MAX SPEED） →Average speed（ AVGSPEED AVGSPEED） Real time speed MAX speed AVG speed...
- Page 9 3)ODO/TRIP/ Driving Time/Error Code Driving Time/Error Code Short press to switch ODO/TRIP/ Driving Time/Error Code Driving Time/Error Code → Trip(Single Trip(Single Trip(Single trip trip trip distance)→ODO(Accumulated distance)→ODO(Accumulated distance)→ODO(Accumulated distance) distance) distance) )→REE(Error Code) REE(Error Code)。 Driving Time TRIP Driving Time Error Code 4)Assist level Short press...
- Page 10 Level 0 Level 5 5) Head light control Long press for 3 seconds turn on/off the head light for 3 seconds turn on/off the head light。 Head Light Open Head Light Close 6) 6km mode When the bike is stopped, long press When the bike is stopped, long press , will enter 6km/h , will enter 6km/h...
- Page 11 ， or short press will quit 6km/h mode. Long press or short will quit 6km/h mode. Long press or short press could be customized by clients. press could be customized by clients. 6Km Mode 6. Parameter setting 6. Parameter setting ，...
- Page 12 P01-back light lightness back light lightness： short press will switch from 1 to 3,Level 3 is will switch from 1 to 3,Level 3 is lightest. Level 2 is default value. lightest. Level 2 is default value. Level 2 – default value default value ：...
- Page 13 Km by default P03-Working voltage Working voltage： short press to switch 24V,36V,48V, Default to switch 24V,36V,48V, Default value is 36V. 36V by default P04-Auto shutdown time: Auto shutdown time: short press to switch from 0 to 60, it is the to switch from 0 to 60, it is the...
- Page 14 time(in minutes) to shut down the screen automatically if no time(in minutes) to shut down the screen automatically if no time(in minutes) to shut down the screen automatically if no operation 0 means never shut down, Default value is 10 minutes operation 0 means never shut down, Default value is 10 minutes operation 0 means never shut down, Default value is 10 minutes 5minutes...
- Page 15 Level 5 P05 = 1 P06-Wheel size selection Wheel size selection： ， in inch， short press to switch wheel size， step： 0.1 inch P07-Number of magnets for speed sensor Number of magnets for speed sensor： short press to switch fromt 1 to 100. 100.
- Page 16 100 magnet for Speed sensor 100 magnet for Speed sensor ： P08-speed limit： short press to set the speed limit from 0 to to set the speed limit from 0 to 100Km/h, 100 means no limit. 100 means no limit. Speed limit 100Km/h P09-Non-zero speed start zero speed start：...
- Page 17 short press to switch from0 to 1. 0 to switch from0 to 1. 0： zero speed start,1:non- -zero speed start. Zero speed start P10-Driving mode selection Driving mode selection： short press to switch from 0->1->2. >2. 0： Assist mode (throttle does not work, only assist); Assist mode (throttle does not work, only assist);...
- Page 18 Driving mode :2 P11-assist sensitivity setting assist sensitivity setting： short press to switch from 1 to 24. to switch from 1 to 24. Assist sensitivity 3 P12-assist starting assist starting power setting: short press to switch from 0 to 5.
- Page 19 Starting power of assist Starting power of assist P13-Assist magnetic disc types Assist magnetic disc types to switch from 5->8->12 ， short press to switch from 5 different numbers of magnets. numbers of magnets. 12 magnets in the disc P14-Current limit for the Current limit for the controller：...
- Page 20 short press to switch from 1 to 20A to switch from 1 to 20A MAX current in controller Is limited to 13A P15-low voltage protection for controller low voltage protection for controller long press during 5 seconds Controller is protected under 29V P16-Reset ODO distance Reset ODO distance：...
- Page 21 long press during 5 seconds ODO is 0 Cleared to 0 P18-Reset all parameters： long press 5 seconds， when it displays “SSSS”， all parameters reset to default values(except for the ODO distance) Ssss means reset to default value...
- Page 22 7. Specifications 1) Power supply: 24V,36V,48V 2) Rated current: 10mA 3) Max current: 30mA 4) Leakage current after power off: <1uA 5) Current supply to controller:50mA 6) Working Temperature： -18~65℃ Storage temperature： -30~80℃ 8. Error code definition When an error appears, S700 will notice users by different codes, please refer to table 1 for different codes: 处理方式...
- Page 23 9. Notices Power on and power off must keep an interval of at least 3 seconds, Power on and power off must keep an interval of at least 3 seconds, Power on and power off must keep an interval of at least 3 seconds, please don’t press “...
Need help?
Do you have a question about the LCD-S700 and is the answer not in the manual?
Questions and answers