Related Manuals for Ourmeter LCD-S700
Summary of Contents for Ourmeter LCD-S700
- Page 1 LCD-S700 Pedal Assisted/Throttled Ebike Smart Computer User’s Manual For Model: Cyrusher XF660-1000w, XT750, XF500-G660 1 / 29...
-
Page 2: Table Of Contents
www.cyrusher.com Contents Introduction: 1. Outside Drawing and Size Requirements..............4 1.)Main materials and colors..................5 2.)Appearance dimensions and installation dimensions（Unit:mm）.......5 3.)External key graphics dimensions and installation dimensions（Unit:mm）..5 4.)Schematic diagram....................6 Physical installation schematic................7 2.Product Introduction and Function Overview............7 1.)The two-way communication protocol and external three-way button facilitate the operation for customers..................7 2.)Speed display.......................7 3.)Kilometer/mile display...................7... -
Page 3: Introduction
Outside Drawing and Size Requirements. 1.)Main materials and colors The material of LCD-S700 instrument shell and external key are mainly ABS, liquid crystal clear window is Acrylic. -
Page 4: External Key Graphics Dimensions And Installation Dimensions（Unit:mm
www.cyrusher.com 3.)External key graphics dimensions and installation dimensions（Unit:mm） 4.)Schematic diagram 4 / 29... -
Page 5: Physical Installation Schematic
www.cyrusher.com Red line: VCC Blue line: Electric lock DS Black line: Green line: Data receiving line RX Yellow line: Data sending line TX Brown line: Headlight DD White line: Headlight GND Note: Specific wiring methods and line colors are customized according to customer requirements. -
Page 6: Intelligent Battery Display
www.cyrusher.com 4.)Intelligent battery display: display the battery’s current power 5.)Headlight control: control the opening and closing of headlights through external keys 6.)Backlight brightness three adjustment: set backlighting according to customers’ using habits, 1 grade means-darkest, 3 grade means-lightest. 7.)Five gears control: according to customers’ requirements, you can choose the assisted gears 0-5 by the outer button, and 0 means neutral gear, no assistance... -
Page 7: Mileage Mode
9.)Error code display: ERRO and error code are displayed when the fault is detected 4.External key definition. LCD-S700 adopts the LCD part and external three - to - button separation in the form of design, the communication is connected by the bottom lead. - Page 8 www.cyrusher.com 3) Mileage Mode、Riding Time、Error Code switch Shortly press the button to switch the display of Mileage Mode、Riding Time、Error Code, show the Trip → ODO → Riding Time → ERR cyclically. display interface switch mode Image 5,6,7,8 shown. 8 / 29...
- Page 9 www.cyrusher.com 4) Assistance Stall Chose Shortly press the button to switch the assistance stalls, change the motor assistance power, min stall 1, max stall 5. It is stall 1 by default in boot state, stall 0 is neutral, which seen image 9,10 shown.
-
Page 10: Headlight Switch
www.cyrusher.com 5) Headlight Switch Long press the button for 3 seconds to open the bike light. Long press the button for 3 seconds again to close the bike light. The headlight display interface are as the image 11,12 shown. 6) 6KM Assistant Drive (walk mode) Long press the button for 3 seconds when in bike is in still state, then the ebike begin assistant drive state, speed presentation is according to the external conditions (Showing... -
Page 11: System Parameter Setting
www.cyrusher.com Figure is 4.5~7.5km/h), showing the symbol of WALK. Release the button (or long press the button for 3 seconds or shortly press the button ), the ebike would exit WALK mode. There are two ways of exiting WALK mode, Long press and shortly press. - Page 12 www.cyrusher.com Back Brightness: Showing P01, shortly press the button to show 1-3,1 is the darkest backlight, 3 is the brightest. 2 is the default state, as the image 14 shows. 2) Metric/Imperial showing P02, shortly press button to switch the display of km/h or mph to set metric/imperial, default state...
-
Page 13: Sleep Time
www.cyrusher.com shows. showing P03, shortly press the 3) Cyclocomputer Support Voltage: button , shows 24~28,each up step is 12, the default is 36V, as the image 17 shows. Sleep Time: showing P04,shortly press button ,and shows 0~60, which indicates the time of 13 / 29... - Page 14 www.cyrusher.com automatic shutdown when the bike is in still state or there is no operation.0 presents “won’t automatic shutdown”. The default sleep time are 5 minutes, as the image 18 shows. Assistance Stall: showing P05, shortly press the button and it displays 0,1,2. 0: the assistant stall is 3-stall mode, which are stall 1,2,3;...
- Page 15 www.cyrusher.com 6) Wheel Diameter Choose: showing P06, shortly press button , switch to corresponding wheel diameter, the unit is inch, accuracy: 0.1, as the image 21 shows. 7) Number of Speed Magnet: showing P07, shortly press the button to switch the display range 1-100, as the image 22 shows.
- Page 16 www.cyrusher.com Shows the number of measured magnetic steel 16 / 29...
-
Page 17: Speed Adjustment
www.cyrusher.com 8）Speed adjustment：display P08 short press key to switch display The speed limit range 0 ~ 100KM/H, 100 indicates the speed limit, as shown in figure 23 Display speed limit 17 / 29... - Page 18 www.cyrusher.com ） Zero boot, non-zero boot setting: display P09, short press key/ key to switch display 0, 1. 0: zero start, 1: non-zero start, as shown in figure 24 Display startup mode 18 / 29...
- Page 19 www.cyrusher.com 10) Drive mode setting: display P10, short press key/ key to switch display 0, 1, 2, as shown in figure 25 0: power driver (which determines how much power the output is through the power of the help gear, and then turns invalid); 1: electric drive (by turning the driver, the gear is invalid at this time);...
- Page 20 www.cyrusher.com 11) Support sensitivity setting : display P11, short press key/ key to switch display 1~24. as shown in figure 26 Display the support sensitivity mode 20 / 29...
-
Page 21: Power Start Strength Setting
www.cyrusher.com 12) Power start strength setting: display P12, short press key/ key to switch display range from 0 to 5, as shown in figure 27. Display the power start strength mode 21 / 29... -
Page 22: Booster Disk Type Setting
www.cyrusher.com 13) Booster disk type setting, display P13, short press key/ key to switch display 5,8,12 disk type, as shown in figure 28 Display the booster disk type setting mode 22 / 29... - Page 23 www.cyrusher.com 14) Controller limit flow setting, display P14 short press key/ key to switch display range from 1~20A, as shown in figure 29. Display the controller limit flow mode press 23 / 29...
-
Page 24: The Controller Undervoltage Value Display
www.cyrusher.com 15) The controller undervoltage value display, display P15, display the controller undervoltage value, shown as figure 30 display the controller undervoltage value mode 24 / 29... - Page 25 www.cyrusher.com 16) The cumulative mileage is zero: display P16, The speed position shows the current cumulative mileage, long key(5s), when the speed shows 0, the cumulative mileage is zero. shown as figure 31, 32. 25 / 29...
- Page 26 www.cyrusher.com display0000 the cumulative mileage is zero 26 / 29...
- Page 27 www.cyrusher.com 17) restore factory settings: display P17, long key(5s), when the speed shows SSSS, it means restore factory settings(except cumulative mileage), shown as figure 33. display SSSS 27 / 29...
-
Page 28: Error Code Definition
www.cyrusher.com 7 Instrument specification parameter 1）24V，36V，48V power supply 2）Rated working current 10mA 3）Maximum working current of meter 30mA 4）Shutdown leakage current is less than 1uA 5）Supply controller side working current 50mA 6）Temperature: - 18 ~ 65 ℃ 7）Storage temperature: - 30 ~ 80 ℃ 8 Error code definition S700 can provide warning for the vehicle fault, in the LCD shows the ERROR icon when a failure is detected, the position ERROR code displayed ERROR code n, n = 0... -
Page 29: Quality Commitment And Warranty Scope
www.cyrusher.com Table 1 9 maters needing attention In use, the time interval between starting and shutdown should not be less than 3 seconds, and do not press the MODE key when it is turned off Pay attention to safe driving in use and avoid instrument crashing. Try not to use it in harsh conditions, such as heavy rain, heavy snow, and exposure.
Need help?
Do you have a question about the LCD-S700 and is the answer not in the manual?
Questions and answers