Harken REFLEX FURLING Unit 1 Installation Manual page 20

Sail Changes: Changing furled sails is easy. Components are available for each sai
A
symmetric spinnakers - Order these additional parts.
• Head swivel
• Tack swivel terminal
• Reflex torsion cable
• Torsion cable clamp set
Code zero sails - Order these additional parts.
• Head swivel
• Fixed tack terminal
• Reflex torsion cable
• Torsion cable clamp set
The sail may have an existing torsion rope in the luff. Talk to your sailmaker about installing a Harken Reflex tor-
sion cable. Requires a separate Dyneema
Changing Sails: With the new sail furled and ready to go, changing sails is quick and easy. Simply pull the
spring pin, slide out one (1) assembly and slide the new sail assembly into the lower drive unit. You can even
switch from a free-flying sail to a code zero sail. Note the fixed tack terminal. Switch sheets and hoist as normal.
20
type tension-bearing luff rope.
®
Reflex furler
l.
Dyneema is a registered trademark of DSM IP Assets B.V.L.L.C