Table of Contents
Advertisement
If You Need Assistance
Or
service
This section is designed to help you save the cost of a service call. First we outline possible problems,
their causes and their solutions. However, you may still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, you will need to provide a complete descrip-
tion of the problem, your appliance's complete model and serial numbers and the purchase date. (See
page 2.) This information is needed to respond to your request properly.
1. Before
calling
for assistance
. . .
Performance problems often result from little things you can find and fix without tools of any kind. Please
check the chart below for problems you can fii. A could save you the cost of a service call.
PROBLEM
Nothlng will
t-
operate
The oven will
not operate
The surface
untts will not
operate
Control
knob(s) will
not turn
POSSlBLE CAUSE
The power cord is not plugged into
a live circuit with proper voftage.
A household fuse has blown or a
circuit breaker has tripped.
The Oven Selector is not turned to
BAKE or BROIL.
The Oven Temperature Control
Knob is not turned to a tempera-
ture setting.
The automatic MEALTIMER"cbck
is not set correctly.
The Stop or Start Time Knobs for
the automatic MEALTIMER" clock
are not set at the correct time of
day.
A household fuse has blown or a
circuit breaker has tripped.
Surface units are not plugged in
all the way.
The control knobs are not being
set correctly.
You are not pushing in before
turning.
SOLUTION
Plug the power cord into a live circuit with
proper voltage. (See Installation Instructions.)
Replace household fuse or reset circuit
breaker.
Turn the Oven Selector to the desired
setting.
Turn the Oven Temperature Control Knob to
a temperature setting.
Set the MEALTIMER clock correctly. (See
"Using the automatic MEALTIMERTM clock'
on page 16.)
lf a delay start or stop is not desired, the Stop
and Start Time Knobs must be turned to the
correct time of day. Turn knobs till they pop
Out.
Replace household fuse or rest circuit
breaker.
Plug surface units in all the way. (See
'Replacing' on page 23.)
Push control knobs in before turning to a
setting.
Push control knob(s) in before turning to a
setting.
26
Advertisement
Table of Contents
