Surface Units and Reflector Bowls
Removing
Burn and Electrical
Shock Hazard
Make sure all surface
units are OFF before
removlng
surface
units and reflector
bowls.
Failure to do so can result in burns or elec-
trical
shock.
1.
Turn off all surface
units.
3. Pull the surface
unit straight away
from the receptacle.
2. Lift the edge
of the unit, opposite
the receptacle,
just enough
to
clear the element
hold down clip,
reflector
bowl and trim ring.
4. Lift out the reflector
bowl and trim
ring. See "Cleaning
Chart" on
page
22 for cleaning
instructions.
16