Mooer Micro Series Owner's Manual

Bass Filter Pedal
Main Features
Ÿ Dynamic envelope filter pedal for both bass and guitar
Ÿ Unique Funky style filter tone, Clean and Fuzz sweeping switch
Ÿ Full metal shell
Ÿ Very small and exquisite
Ÿ True bypass
Ÿ DC 9V Adapter power supply
Clean: Excellent dynamic envelope filter effect, unique vocal-like
sounds.
Fuzz: Add vintage fuzz tone into the sound.
3
DC IN
Fuzz
Clean
6
7 8
RANGE
9
4
INTENSITY
5
6. Mode Switch: Switch between Clean mode and Fuzz mode.
7. RANGE Knob: Adjust the frequency range.
8. RESO Knob: Adjust the internsity of resonance.
9. INTENSITY Knob: Adjust the sensitivity of filter effects.
Working Modes: 2 (Clean/Fuzz)
Input: 1/4" monaural jack (impedance: 220k
Output: 1/4" monaural jack (impedance: 1.4k Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 7 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of SWEEPER, when
the LED is lit up, the effects
is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting bass or guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
Ohms )