Philips 32PFL9603D/10 Service Manual page 40

Chassis q529.1e la
Hide thumbs Also See for 32PFL9603D/10:
Table of Contents

Advertisement

EN 40
5.
Q529.1E LA
00 009.989 IP address is 192.168.1.22
00 009.989 subnet mask is 255.255.255.0
00 009.989 $router is 192.168.1.1
00 009.989 First Gateway is 192.168.1.1
00 009.989 $dns is 192.168.1.1
00 009.989 DNS1 is 192.168.1.1
00 009.989 Interface is eth0
00 009.989 HandleUdhcpcNotif : msgq is 32769
00 010.083 route: SIOC[ADD|DEL]RT: No such process
01 010.623 svspow_m.c:3497::juice powntf received for ON
01 010.626 svspow_m.c:1803::Reached HandleTurnOn2Event with Event = 512
01 010.641 svspow_m.c:1943::ceapps setpower On
-1 010.649 AppMan: Window config - unhiding window
-1 010.649 Relayout of window 4
-1 010.657 AppMan: Switch focus to 0x5132d600 [4]
00 010.702 (!!!) *** WARNING [color keying does not work on UPPER layer] *** [Philips/DirectFB/systems/cetvfb/primary.c:202 in get_color_minmax()]
01 010.868 svspow_m.c:3479::apps powntf received for ON
-1 010.881 AppMan: Window added (0,0-720x576) [5] - 0!
01 010.897 Surface 1, PlaneId 0 in AttachSurface
01 011.083 svspow_m.c:1803::Reached HandleTurnOn2Event with Event = 1024
01 011.086 svspow_m.c:693::Set Reached on state at 1792005965
01 011.088 svspow_m.c:755::Set has reached ON state
01 011.091 InitCehtvData done
01 011.312 ReadCehtvData ConfigVersion: [0.01] OK
01 011.312 ReadCehtvData ProductID: [Q591E] OK
01 011.312 ReadCehtvData OUI: [0000903E] OK
01 011.312 ReadCehtvData HardwareModel: [0203] OK
01 011.312 ReadCehtvData HardwareVersion: [0100] OK
01 011.312 ConvertAscii2Bin started
01 011.312 ConvertAscii2Bin done
01 011.312 ConvertAscii2Bin started
01 011.312 ConvertAscii2Bin done
01 011.312 ReadCehtvData PublicKey: OK
01 011.339 ReadCehtvData done, ConfigOK: TRUE
00 011.666 cetvbend_mpowon: iambl_SetState onoff = 1
00 011.668 cetvbend_mpowon: iambl_SetState onoff => cetvambi_ambl_SetState
00 011.672 cetvbend_mpowon: cetvambi_ambilight_Enable
-1 011.884 HK_PREPARE_PS_DONE received for cmd: 5, src: 1
-1 011.884 Remaining PowerChangeBitmap: 0
-1 011.884 starting : /philips/apps/spettApp
-1 011.884 starting : /philips/apps/media
01 011.905 svspow_m.c:2871::PREPARE_PS_DONE for cmd: 5
01 011.994 cbmhgpow_mpow: mRegisterAlarm - ClockSet
02 012.518
*--------------) FusionDale v0.1.1 (--------------*
02 012.518
02 012.518
-----------------------------------------------
02 012.524 Using errlib version 0.9
02 012.524 ***SPETT*** FusionDale Init done
02 012.524 ***SPETT*** Windows created
00 012.530 Errlib 0.9 registered from process 226
00 012.530 *** DirectFB Surface allocation FALLBACK! Acquiring id 7 with size 376320
-1 012.533 AppMan: Process added (226) [4]!
-1 012.533 AppMan: Window added (0,0-800x600) [6] - 0!
-1 012.533 Border window attached
-1 012.533 AppMan: Window added (100,100-672x280) [7] - 2!
-1 012.533 AppMan: Window config - unhiding window
-1 012.533 AppMan: Switch focus to 0x51334000 [7]
02 012.581 Event class: DFEC_WINDOW
01 012.791 NITParser: Else of sec_SctArrived
01 012.791 cbmhgoad_m: strapi notification on completed
01 012.852 cbmhgoad_m :TARGETNIT = 0, TARGETNID = 513, spid = -1
01 012.854 cbmhgoad:mBarkerOadPumpHandler : mPrefFreqDirFound = 0
01 012.857 cbmhgoad: noofrecords = 0
03 013.196 MediaApp: Initalized and running
03 013.312 (*) FusionDale/Config: Parsing config file '/etc/fusiondalerc'.
03 013.312
*--------------) FusionDale v0.1.1 (--------------*
03 013.312
03 013.312
-----------------------------------------------
03 013.312 (*) Fusion/SHM: NOT using MADV_REMOVE (2.6.18.0 < 2.6.19.2)! [0x020 61200]
03 013.312 (*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 244)...
03 013.334 Using errlib version 0.9
03 013.334 MediaApp: Call back Init from gplib
00 013.338 Errlib 0.9 registered from process 227
03 013.482 arunkp: mplfabsav2_m.c: 209: mplfabsav2__pow_Init:
-1 013.583 AppMan: Process added (227) [5]!
03 013.619 MediaApp: Gfx Init done
03 013.891 mediaApp: fusiondale Init, register called
03 013.891 mlock patch inited
-1 013.895 AppMan: Window added (100,100-480x300) [8] - 0!
-1 013.895 Border window attached
-1 013.895 AppMan: Switch focus to 0x51334e00 [8]
-1 013.895 AppMan: Window added (100,100-480x300) [9] - 1!
-1 013.895 Audio node attached
-1 013.907 AppMan: Switch focus to 0x51334e00 [8]
03 013.955 Network enabled and available - enabling allegro
03 013.958 allegroenb_Enable
02 014.072 ***SPETT*** All inits done
02 014.075 ***SPETT*** gpilib.startr.Init done
01 014.105 ReadCehtvData done, ConfigOK: TRUE
01 014.107 cbmhgoad_mswupdt: chil_test_oui_only OUI = 0xd060, ret = 0
01 014.375 CEAPPS : TARGETNIT = 0, TARGETNID = 8, spid = -1
03 014.555 The address is: 192.168.1.22
03 014.559 arunkp: mplfabsav2_m.c: 219: mplfabsav2__pow_TurnOn:
-1 014.957 AppMan: Window added (0,0-852x480) [10] - 2!
00 015.002 *** DirectFB Surface allocation FALLBACK! Acquiring id 0 with size 410880
03 015.005 Surface 0, PlaneId 2 in AttachSurface
00 015.027 (!!!) *** WARNING [color keying does not work on UPPER layer] *** [Philips/DirectFB/systems/cetvfb/primary.c:202 in get_color_minmax()]
03 015.224 Infrastructure Resource Gained by mediaApp
03 015.226 (resourcechanged && !(ResourceOwned & FULL_STATE) : Setting mappstate_mediaIdle
-1 015.276 AppMan: Window config - unhiding window
00 015.671 ***GVC: T2 - ceisusb_m.c (951): "usbdevspN_OnDeviceError( DeviceUnknownAttachedError, -1 )" notification given
Service Modes, Error Codes, and Fault Finding
(c) 2006-2007 directfb.org
(c) 2006-2007 directfb.org
Figure 5-21 Example UART log during SWUPG startup (Normal startup) part 4.
I_17662_004d.eps
110608

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

32pfl7623d/1032pf9968/10

Table of Contents