Table of Contents
Advertisement
Using Your Range
Using the surface units
Control
knobs
must be pushed
in
before turning
them to a setting.
They can be set anywhere between HI
and OFF.
Surface
unit markers
The solid dot in the surface unit marker
shows which surface unit is turned on
by that knob.
Surface
heating
indicator
light
The SURFACE HEATING Indicator
Light on the control panel will glow
when a surface unit is on.
Hot surface
indicator
lights
The Hot Surface Indicator Lights on
the cooktop surface will glow when the
surface units are turned on. The Indica-
tor Lights will continue to glow as long
as the surface units are too hot to touch,
even after they are turned off.
Be sure all control knobs are
turned to OFF and all indicator
lights are OFF when you are not
cooking.
Someone
could be
burned or a fire could start if a
surface unit is accidentally
lefl ON.
NOTE: The surface elements may
smoke slightly and emit a burning odor
during the first few hours of use. This is
normal. It is caused by the insulation
material of the new ceramic cooktop
elements and will not occur again.
Burn and Fire Hazard
Advertisement
Table of Contents
