Setting The Alarm; Radio Function - Sylvania SCR1320B Manual

4. To set the DATE, press SET again one more time and the DATE DIGIT
digit will flash. Press UP/DOWN to adjust the DATE digit.
5. To set the DAY, press SET again and the DAY CHARACTERS will
flash. Press UP/DOWN to adjust the DAY.

SETTING THE ALARM

1. In the normal Display mode, press MODE once and the display will
show the ALARM TIME. The "ALARM 1" icon indicates that the
display is showing the ALARM TIME.
2. To set the ALARM TIME, keep pressed SET Button for 8 seconds
and the HOUR digits will flash. Press UP/DOWN to adjust the HOUR
digits.
3. To set the ALARM MINUTE, press SET once more and the MINUTE
digits will flash. Press UP/DOWN to adjust the MINUTE digits.
4. When the Time meets the PRESET ALARM TIME, the alarm sound will
be on. Press SNOOZE (3), and the alarm will turn off, and automati-
cally turn on after 5 minutes.

RADIO FUNCTION

1) Press the SCAN (8) continuously to tune the desired FM station.
2) When the frequency reach 108 MHz, press RESET (2) to re-start from
87.5 MHz
PROJECTION CLOCK
1) To switch ON the projection, move the switch (10) to ON.
2) Press the SNOOZE / LIGHT button
3) to switch ON the projector for 5 seconds.
Focus setting : To adjust the projec tion clock definition by turningthe
FOCUS until the project's time is clearly shown on theceiling or wall.
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DAR
KENED ROOM. MAXIMUM PROJE-CTION DISTANCE IS 3-9 FEET.
- 2 -