Controls And Functions; Power Supply; Setting The Lcd Display - Sylvania SCR1320B Manual

CONTROLS AND FUNCTIONS

1. Projection Clock
2. Reset Radio button
3. Light/Snooze Button
4. Mode Button

POWER SUPPLY

1. DC 6V/500mA ADAPTOR(INCLUDED)
2. 4 x AAA (BATTERY NOT INCLUDED)
DISPLAY
1. Normally the LCD DISPLAY indicates the CALENDAR, which shows
the MONTH, DATE, DAY, and TIME.
2. Press LIGHT/SNOOZE once and the BACKLIGHT will activate. The
BACKLIGHT will automatically turn OFF after 6 seconds.

SETTING THE LCD DISPLAY

1. In the normal Display mode, to set the TIME, keep pressed SET Button for
8 seconds and the HOUR digits will flash. Press UP/DOWN to adjust the
HOUR digits.
2. To set the MINUTE, press SET once more and the MINUTE digits will
flash. Press UP/DOWN to adjust the MINUTE digits.
3. To set the MONTH, press SET again again and the MONTH digits will
digit will flash. Press UP/DOWN to adjust the DATE digit.
5. Down button
6. Up Button
7. Set Button
8. Scan Radio
- 1 -
9. Battery Pack
10. Projector Switch
11. Reset button