Alarm Set; Snooze Function - Sylvania SCR0932 User Manual

14. USB CHARGING Port
15. AUX IN Jack
16. FM Antenna
17. Battery door
18. QI Charging position
19. Rubber feet
SET TIME/YEAR/MONTH/DAY
1. Power on the unit, the display will be blinking. Now in the TIME SET mode, press
[HOUR/SKIP‐] button to set the hour, press [MIN/SKIP+] button to set the minutes, press
and hold [CLOCK/MEM.] button for 2‐3 seconds in the YEAR SET mode (year range:
2000‐2099), press [HOUR/SKIP‐] button to decrease the year, press [MIN/SKIP+] button to
increase the year, press [CLOCK/MEM.] button to confirm the year set then in the
MONTH/DAY SET mode, press [HOUR/SKIP‐] button to increase the month and press
[MIN/SKIP+] button to increase the day, press [CLOCK/MEM.] button to confirm the
month/day set then exit the time set mode. The unit will auto‐exit the set mode if you do
not press any buttons for 5 seconds
2. Under standby mode, press and hold [CLOCK/MEM.] button for 2‐3 seconds, the LED will
start blinking, the unit enters time set mode. Setting method same as above
ALARM SET
1. Under standby mode, press and hold [AL.1/VOL‐] button, the "AL.1‐BUZZ" indicator and
time will start blinking, the default alarm time is 12:00AM, press [HOUR/SKIP‐] button to
adjust the hour, press [MIN/SKIP+] button to adjust the minute, press [AL.1/VOL‐] button
confirm the set then into the repeat date set, press [HOUR/SKIP‐] button and [MIN/SKIP+]
button can select "WEEK 1‐7", "WEEK 1‐5", "WEEK 6‐7", press [AL.1/VOL‐] button to
confirm the set then exit the set mode, the alarm will be activated.
2. Under standby mode, press [AL.1/VOL‐] button, you can select BUZZER→RADIO→ALM OFF.
If you not press the [AL.1/VOL‐] button for 5 seconds, the unit will auto confirm the alarm
and exit the set mode
3. When the alarm is activated, if you don't press any buttons, the alarm will auto‐stop after
continued for 1 hour, press [AL. OFF/POWER] button can turn off the alarm. The related
indicator will be blinking when the alarm is activated
4. Alarm 2 set same as Alarm 1
SNOOZE FUNCTION
When alarm is activated, press [SNOOZE/SLEEP] button into snooze mode, the alarm will be
activated again after 9 minutes, continued for 60 minutes, press [AL. OFF/POWER] button to
turn off the alarm