Table of Contents
Advertisement
LinkIt 7687 HDK V30 User's Guide
C94
C93
Figure 8. Location of the components C93 and C94
4.8.
CMSIS-DAP Firmware update procedure
The latest firmware from OpenSDA platform can be downloaded from the mbed official website. To update the
binary firmware of CMSIS-DAP, press and hold the S1, then plug-in the USB cable to CON5, release the button S1
once the mass storage is shown, and then drag and drop in the binary code. After the mass storage disappears,
keep the power connected for 10 seconds, and then reboot the system again to finish the firmware update.
© 2015 – 2016 MediaTek Inc.
Page 19 of 23
This document contains information that is proprietary to MediaTek Inc. ("MediaTek") and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
Advertisement
Table of Contents
