Table of Contents
Advertisement
D15
D14
D13
D12
D9 (UART Tx)
D10 (UART Rx)
D6
5) D11, D12, D13, D14, and D15 are LEDs assigned for user interaction. All LEDs are high active (Figure 5).
GPIO pins to activate the LEDs are shown in Table 3.
LED
D11
D12
D13
D14
D15
4.4.
Buttons
The LinkIt 7687 HDK is equipped with buttons with the following functionality. The push buttons are shown in
Figure 1.
1) System reset button (S1) resets the LinkIt 7687 HDK.
This document contains information that is proprietary to MediaTek Inc. ("MediaTek") and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
Figure 5. On-board LEDs
Table 3. GPIO pins to activate the LEDS
GPIO
GPIO31
GPIO35
GPIO34
GPIO33
GPIO6
© 2015 – 2016 MediaTek Inc.
LinkIt 7687 HDK V30 User's Guide
D5
Page 12 of 23
Advertisement
Table of Contents
