Advertisement
6. operation
6.1.
When target torque is reached, the user will hear the buzzer and also feel the vibration at the handle. (note: in PeAK mode,
when you reach the programmed torque, the buzzer will emit a continuous tone. Press "
or press "
" button to zero the value and turn off the warning indicator.
6.2.
When the force is applied in an anti-clockwise direction, the display will show a minus (-) sign on the left side of screen, the reading
will be positive when the wrench is applied in a clockwise direction. To change ratchet direction see fig.4
6.3.
the torque screwdriver will automatically switch off if there is inactivity for over 5 mins.
7. maintenance
do not store this product in dusty, sandy, humid areas
8
or near any heat sources.
8
do not leave it in places where it may be subject to high temperatures.
8
Always keep the torque screwdriver dry. Water or other liquid will damage the electronic components inside.
9
if the tool is not used for a long period of time, remove the batteries in order to prevent damage from leakage.
9
Always turn off this product before cleaning. use only a damp cloth for cleaning. never use any type of liquid or aerosol cleaner, or
9
any type of organic solvent to clean this product.
recalibration
7.1.
7.1.1.
if the user does not utilize a control procedure, a period of 12 months, or 5000 cycles, whichever occurs first, may be taken as default
values for the interval between calibrations. the interval starts with the first use of the torque tool. shorter intervals between
calibrations may be used if required by the user, their customer or by legislation.
7.1.2.
recalibration must take place after any repair, overload, impact or other misuse.
contact a uKAs accredited laboratory for recalibration.
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
Battery removal
remove battery cover on side of screwdriver and remove batteries, replace cover.
under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
fig.4
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
" button switch to trAcK mode
01284 757500
01284 703534
sts104 | issue 1 15/05/17
www.sealey.co.uk
sales@sealey.co.uk
Advertisement
