Extra-large size stainless steel camera housing (5 pages)
Summary of Contents for TecnoVideo 129LC Series
Page 1
129LC Series Liquid Cooled Stainless Steel Camera Housing Installation manual Issue 0510...
Page 2
To avoid oil and dust particles and to grant clean air for the barrier, a filtering battery is available as optional. The 129LC series camera housings are made by two AISI316L stainless steel tubes close at their ends in a way that a special chamber that allows water or other cooling liquids to cool down the housing.
Page 3
Upper rail 2. Prepare the housing to install the camera, sliding the upper rail away from the lower rail. Lower rail 3. Install the camera on the upper rail using the one of the ¼” screws supplied, the plastic washer and one or more spacers to be put under the camera to adjust its height position.
Page 4
DIMENSIONS FRONTAL VIEW SIDE VIEW Dimensions in millimetres – Design and product specifications subject to change without notice TECNOVIDEO S.n.c. Via San L. Murialdo, 8 36030 Villaverla (VI) ITALY Tel. +39.0445.350444 Fax +39.0445.357259 e-mail: info@tecnovideocctv.com – www.tecnovideocctv.com...