Maxair 2260-05 DLC Shroud Instructions For Use

CAUTION: Before use, refer to the CAPR System User's Instructions Manual received with each MAXAIR Helmet for
!
details. Always start with a 2260-05ML unless the wearer has a very small head (Bottom, page 3.).
Symbol Definitions
!
Warning, Caution, or Note
O.N.
Order Number
!
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
familiar with the system's NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User's Instructions should use this product.
Failure to follow the User's Instructions Manual may be hazardous to
the user's health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to regula-
tory requirements. Bio-Medical Devices Intl, Inc. does not recommend
the appropriate systems for a particular institution or facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level II: fabric may burn if exposed to open flame.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
Bio-Medical Devices Intl
O.N. 2260-05SM
(Small-Medium)
O.N. 2260-05ML
(Medium-Large)
PN
Part Number
System or component, be sure to be
17171 Daimler Street
2260-05 DLC Shroud
Instruction For Use
Intended Use
The MAXAIR CAPR Shroud Systems are intended to filter
® ®
aerosolized and droplet particulates.
Shrouds are designed for single use applications.
For Use With
The MAXAIR 2260-05 DLC-Shroud is a component of the
MAXAIR CAPR Shroud Systems and is intended to be donned with a
MAXAIR CAPR Powered Air Purifying Respirator (PAPR)
Helmet and a Filter Cartridge.
Standard CAPR System with 2260-05 DLC Shroud
1
4
7
1. 2081-03 Helmet
(2081-03 Helmet, 2051-07
SnapOn Cage removed, 2071-
06 Liner, 2590-05 Power Cord)
4. 2500-36TSC Battery**
6. 2600-01 Battery Charger
*Alternate Filter Cartridges include the 2166-10 and 2167-10.
**Alternate Batteries include the 2500-37TSC.
Materials
DLC Lens is PETG
DLC Cuff is Polyurethane
Shroud body is Polypropylene
Specifications
Temperature Limits: 49
0
Efficiency Rating: HE
Regulatory
NIOSH
Irvine, C A 92614 800-443-3842
2
5 6
2. 2164-10 Filter Cartridge*
3. 2061-08 Filter Cover Cap
5. 2000-76 Battery Belt
7. 2260-05 DLC Shroud
C
www .maxair-systems.com
01023577 Rev B
3
Page 1