IBM PCjr Hardware Maintenance And Service page 389

Print Mechanism Assembly Removal 1488
1. Set printer POWER switch to OFF; unplug printer
power cord from wall outlet and disconnect printer
cable.
2. Remove forms.
3. Remove rack (1440).
4. Remove access cover (1430).
5. Remove ribbon cartridge.
6. Remove top cover (1432).
7. Remove driver circuit card (1420).
8. Remove control circuit card (1415).
9. Remove two screws 0 from base unit of print
mechanism assembly.
10. Remove shipping screws 0 if still installed.
11. Remove screw o from ground strap.
12. Lift print mechanism assembly from base cover.
§
DD
O
Graphics Printer 4-1400-57