Assembly - Espin Sport Owner's Manual

ASSEMBLY

Carefully remove your Espin eBike and all remaining contents from the
box. Please check that the following pieces are included in the box and
immediately contact Espin eBikes if anything is missing:
• Espin eBike (Sport or Flow)
• Pedals (Left and Right)
• Front wheel and front quick release pin
• Saddle and seat post
• Charger and pouch
• eBike Keys
• multi-purpose tool kit
1. Remove all packing and protective material from frame and components
2. Mount the front wheel by placing the front wheel in the fork and securing it
using the quick release pin. Make sure the disc brake is properly aligned.
3. Assemble the front headlight on the bolt above the front fork. Make sure to
secure the nut on the back of the bolt while tightening the bolt with the 5 mm
alan wrench key
4. Assemble the handle bar with the hand grips and LCD Display facing the rider
5. Attach Pedals. Note that the Left (L) pedal has a left thread meaning it is
6. tightened by turning it counterclockwise. The Right (R) pedal is tightened by
turning it clockwise
7. Install seat post. Secure it tightly using the quick release lever after adjusting it
to your desired height.
8. Inflate tires to the desired PSI. Recommended PSI is between 40-65
9. Do a quick check of all the components on the bike to make sure no parts
have come loose during the transit and shipping of the eBike.
10. Completely charge the battery before your first ride
4